Download Commodity

Download Commodity

This wikiHow teaches y'all how to play a Wii game from a file that's stored on a USB flash drive rather than on a disc. Continue in mind that this works on the archetype Wii, only not the Wii U. Playing a game from a USB bulldoze requires you to install on your Wii the Homebrew Channel, which voids your Wii's warranty and violates Nintendo's terms of use. After you've installed all of the necessary items, you'll exist able to burn down a disc's contents onto your flash bulldoze, at which betoken you lot tin can play the game from the flash drive rather than from the disc.

  1. 1

    Make sure that y'all have the right equipment. You'll demand the post-obit items for this job:[ane]

    • SDHC card - A big SD card of upwardly to 8 gigabytes is needed to install Homebrew and perform other file-based tasks.
    • USB flash drive - This is the drive on which you'll install the games.
    • Wii remote - If you take a newer (not-white) model of Wii, you'll need a generic Wii remote to help with the installation.

  2. 2

    Format your flash bulldoze every bit FAT32. To do so, select FAT32 (or MS-DOS (FAT) on a Mac) in the "File System" section of the format bill of fare.

    • Keep in mind that formatting a flash bulldoze will erase its contents, so back up the contents to your computer or some other flash bulldoze if necessary.

    Ad

  3. iii

    Empty the Wii's disc drive. If there is currently a disc in the Wii, eject it earlier proceeding.

  4. 4

  5. 5

    Install Homebrew on your Wii. If you lot haven't yet installed the Homebrew Channel for your Wii, you'll need to do so before proceeding. The Homebrew Aqueduct allows yous to install custom modifications, i of which will let you play games off of a USB drive.

  6. half dozen

    Format your SD carte du jour . Once you've installed Homebrew with the SD carte du jour, you'll need to wipe it clean and so that you tin can use it for the USB installation files. The easiest way to do this is by formatting the SD bill of fare.

    • As with the flash drive, choose FAT32 (or MS-DOS (Fatty) on a Mac) as the file arrangement.

    Advertisement

  1. ane

    Employ a Windows reckoner for this function. Unfortunately, you cannot format correctly your flash drive for Wii use on a Mac. If yous don't have admission to a Windows estimator, attempt using i at a library or borrowing one from a friend.

  2. 2

    Determine your Windows bit version . You lot'll need to know whether your version of Windows is a 64-bit system or a 32-flake system in order to know which file to download in a minute.

  3. 3

  4. 4

    Click Free Download . Information technology'southward the green push in the upper-correct corner.

    • Sentinel out for any add pop-ups and be careful not to click whatever download links to software you lot didn't intend to download.

  5. v

    Click Kickoff Download . It'south the green button in the middle of the page. This volition download a nada file containing the setup file for WBFS Managing director.

  6. vi

    Open the Nix folder. Double-click the downloaded Nil folder to open it.

  7. 7

    Double-click setup.exe . It'southward in the ZIP binder. Doing so will open the setup window.

    • Brand certain you install Dotnet before you prepare the program.

  8. 8

    Install the plan. Utilise the following steps to install WBFS Manager:

    • Click Adjacent.
    • Click Browse to select an install location (optional).
    • Click Next.
    • Click Next.
    • Click Yes.
    • Click Close.

  9. 9

    Plug your wink bulldoze into your computer. The flash drive should fit into i of the rectangular USB ports on your computer.

  10. 10

    Open WBFS Director. Double-click the WBFS Manager app icon, which resembles a Wii on a blueish background, to do and so. You lot can notice it in your Windows Start bill of fare.

    • The offset time you lot open up WBFS Managing director, you volition need to click Yes to allow it to access your arrangement.

  11. 11

    Select your flash drive. Click the "Drive" drop-downwardly box in the upper-left corner of the window, then click your drive'south letter of the alphabet (usually F:).

    • If you lot don't know the wink drive's alphabetic character, expect for it in the "Devices and drives" department of the This PC app.

  12. 12

    Click Format . This will format your flash drive for use with the Wii.

  13. 13

    Eject the flash drive. Click on the flash drive's icon in the lower-right side of the screen, so click Eject in the pop-up menu and remove the bulldoze from your computer.

    • You may accept to click the upward-facing pointer hither to run into the flash drive's icon.

    Advertizement

  1. 1

    Plug your SD card into your computer. The SD card should fit into your estimator'south SD carte slot angled-side-in, logo-side-up.

    • If your estimator doesn't have an SD carte slot, you'll need to use a USB adapter for your SD card too.

  2. 2

  3. 3

    Click Download . It's the button in the upper-right corner of the screen. This downloads the USB Loader GX null file.

  4. four

    Extract the files. On a Windows computer, double-click the Nil folder, click Extract at the top of the folder'southward window, click Extract all in the resulting toolbar, and click Extract when prompted. This will excerpt the files to a regular binder and open the folder when the extraction completes.

    • On a Mac, just double-click the Zip folder to open up it.

  5. 5

    Open the "Files" folder. Double-click the USB Loader GX folder, and so double-click the Files binder at the tiptop of the next window.

  6. 6

    Re-create the all files in the Files folder. Click on one file in the folder, printing Ctrl + A (Windows) or Command + A (Mac) to select all of the files, and press Ctrl + C (Windows) or Command + C (Mac) to re-create the files.

  7. 7

    Click your SD card's name. It's on the left side of the window in File Explorer on WIndows or Finder on Mac.

  8. 8

    Paste in the files. Click a blank space in the SD carte du jour's window, then press Ctrl + V (Windows) or Command + V (Mac). The files will re-create onto the SD card.

  9. nine

    Squirt the bill of fare. Once your files stop copying, you can proceed with removing your SD menu. To exercise so:

    • Windows - RIght-click the drive in the panel to the left and click Eject.
    • Mac - Click the upward-facing arrow to the right of your SD carte'south name in the left-hand pane.

    Advertisement

  1. 1

    Plug your SD carte du jour into your Wii. Information technology should fit in a slot in the forepart of the Wii.

  2. 2

    Turn on your Wii. Press your Wii'due south power button, or use the power button on the remote.

    • The Wii's remote volition need to be on and synced as well.

  3. 3

    Press A when prompted. This volition take you to the main menu.

  4. 4

    Start the Homebrew Channel. Select the Homebrew Aqueduct on your Wii'southward chief menu, and then select Showtime when prompted.

  5. 5

    Select IOS236 Installer . It's on the kickoff page of the Homebrew Aqueduct. A popular-up menu will appear.

  6. 6

    Select Load when prompted. You'll notice this option in the bottom-middle of the pop-up bill of fare.

  7. vii

    Press the 1 push. Doing so selects the Install option.

    • If you're using a GameCube controller, press the Y button instead.

  8. 8

    Select <Download IOS from NUS> . It's at the bottom of the page.

    • If yous don't see this option, select the text in brackets at the lesser of the screen and press Correct until you see information technology appear.

  9. 9

    Press A when prompted. Doing so volition install the IOS236 base of operations onto your Wii. This process can accept upwards of 20 minutes, and so exist patient.

  10. 10

    Press any button when prompted. This volition get out the setup and render yous to the Homebrew Channel.

    Advertisement

  1. 1

    Select cIOSX rev20b Installer . It's in the heart of the start page of the Homebrew Channel.

  2. 2

    Select Load when prompted. The installer window menu will open.

  3. 3

    Scroll left to the "IOS236" option. This will select the IOS236 file that you installed earlier.

  4. 4

    Press A . Doing so confirms your option.

  5. 5

    Concur to the terms of use. Press A on your controller to do so.

  6. half-dozen

    Select an IOS version. Press Left until you encounter "IOS56 v5661" between brackets, then press A.

  7. 7

    Select a custom IOS slot. Press Left until you encounter "IOS249" between brackets, then press A.

  8. 8

    Select an installation mode. Press Left until you see "Network installation" appear betwixt the brackets.

  9. 9

    Start the installation. Press A to begin installing the IOS installer.

  10. x

    Press any push button when prompted. This volition movement y'all to the adjacent part of the installation.

  11. 11

    Select some other IOS version. Press Left until you run across "IOS38 v4123" between the brackets, then press A.

  12. 12

    Select another slot. Press Left until you see "IOS250" betwixt brackets, then printing A.

  13. xiii

    Use the network installer. Select "Network installation" and press A equally you did with the terminal installer, then await for the installation to complete.

  14. 14

    Press whatever button when prompted, then printing the B button. This will restart your Wii. When it finishes restarting, you'll be able to go on.

    Advertisement

  1. ane

    Navigate to the next page of the Homebrew Channel. Press the Right arrow on your Wii remote's D-pad to do so.

    • Y'all tin can also press the + button.

  2. 2

    Select WAD Manager . Information technology's the second pick on this page.

  3. 3

    Select Load when prompted. Doing so will first up the WAD Manager installer.

  4. 4

    Press A . Doing so agrees to the terms of apply.

  5. 5

    Select "IOS249" to load. Press Left until you see "IOS249" in between brackets, then press A.

  6. 6

    Disable the emulator. Select "Disable" in between the brackets and press A.

  7. 7

    Select your SD card. Select "Wii SD Slot" in between the brackets, then press A. Doing so brings upwardly a list of the files on the SD menu that you inserted earlier.

  8. 8

    Scroll downward and select WAD . It'southward near the bottom of the screen.

  9. ix

    Select the USB loader. Scroll down to select USB Loader GX-UNEO_Forwarder.wad and printing A.

  10. x

    Install the WAD Manager. Press A when prompted to practise so.

  11. 11

    Printing any button when prompted, then printing the Home ⌂ button. This will restart the Wii. Once the Wii finishes restarting, you'll be back on the second page of the Homebrew Channel.

    Advertisement

  1. ane

    Press the Dwelling ⌂ push button once more. Doing and so brings upwardly the Home carte.

  2. 2

    Select Shutdown . Information technology'due south at the bottom of the card. Your Wii volition power down.

    • Information technology'southward best to wait until your Wii fully powers down before proceeding.

  3. 3

    Plug your flash drive into your Wii. The wink drive should plug into a USB port at the back of the Wii.

  4. four

    Turn back on your Wii. Press your Wii'southward power button to do so.

  5. v

    Press A when prompted. Doing so volition have you lot to the Wii's habitation menu, where y'all should at present see a USB Loader GX channel to the right of the Homebrew Channel.

  6. 6

    Select USB Loader GX . Information technology'due south next to the Homebrew Channel.

  7. 7

    Select Beginning . Doing so will load the USB Loader GX program.

    • This process will have several minutes, peculiarly the first time you run the program.
    • If you see a "Waiting for your slow USB" message, try plugging the USB flash drive into a unlike port on the dorsum of the Wii.

  8. viii

    Insert a game. Identify in the Wii the disc for a game that you lot want to support to the USB flash drive.

  9. 9

    Select Install when prompted. The program will begin reading the contents of the disc.

  10. 10

    Select OK when prompted. Doing so will prompt your Wii to brainstorm burning the disc onto the USB flash bulldoze.

    • This procedure will take quite some time, and the burning progress bar may appear to freeze at multiple points. Do not remove your USB drive or restart your Wii if this happens.

  11. 11

    Select OK when prompted. This will consummate the called-for process.

    • At this point, you tin eject the game disc from the Wii.

  12. 12

    Play your game. Click the game'southward proper noun, so click the spinning disc icon in the middle of the window. This will launch the game.

    Ad

Add New Question

  • Question

    How do I play games from my USB drive when the screen goes blackness?

    Community Answer

    If the Wii is stuck on the black screen, your console may accept crashed. If you cannot force a shutdown, the only way is to unplug the Wii'due south ability. If the screen goes blackness and returns to the Wii menu, you lot'll need to install a cIOS.

  • Question

    What if I accept already 'hacked' my Wii? Do I but skip home-brewing again?

    Community Answer

    Yep, y'all should skip that footstep as you already hacked it and already tin can install homebrew apps.

  • Question

    How do I format my hard bulldoze to play Wii games?

    Community Answer

    Utilize a tool such as WBFS manager or WiiBackup Managing director to format your hard or USB drive to be used for Wii games.

  • Question

    Is it necessary that I format the SD card after installing the homebrew aqueduct?

    Community Answer

    After homebew is installed, yous merely need to delete the files on your SD card. Formatting the carte is non required.

  • Question

    Can I download a game, copy information technology to a USB drive, then run it with the USB loader?

    Community Answer

    Unfortunately, that'south non possible. Y'all tin install Wii ISOs from the internet, and and then put it on your USB with the Wii backup manager.

  • Question

    I hacked my Wii and used Wii Backup director and opened USB Loader GX. The epitome of the installed game worked, and I thought the gameplay worked, simply information technology didn't it always send me back to the Wii menu. Why?

    Milos Tosic

    Milos Tosic

    Customs Answer

    Did you effort to load another game? It may exist because the WBFS for that game is broken.

  • Question

    How exercise I turn my controller dorsum on? On parts 3 and iv it turns off and won't turn back on.

    Community Answer

    If you are using a black or any non-white Wii remote, information technology has the motion plus controller in it. Those Wii remotes will non piece of work. Effort using the generic white Wii remote. If that does non work, try plugging in the generic GameCube controller.

  • Question

    Regarding steps four and 5: information technology appears that the newer version of the files don't include the plan from the second screenshot (the one in blue). Is it no longer necessary?

    Community Answer

    No. You lot but need to install the Homebrew Aqueduct and USB Loader GX. Zip else is needed.

  • Question

    Near the end of pace 5, I shut the "dop-mii," but the screen where I am supposed to printing left until IOS36 does not pop up, and I am returned to the home screen. Is it successfully installed or did I do something wrong?

    Community Answer

    This guide is outdated. Y'all just need to install the Homebrew Aqueduct and use a Homebrew app called USB Loader GX. Some guides will recommend you format the drive with WBFS Manager, but this is unnecessary. Don't install cIOS's or employ DOP-mii since those tools tin ruin your Wii. If your Wii yet works, don't try to install anything else!

  • Question

    How do I crook in games? Can I cheat in online games?

    B0ihelpz

    B0ihelpz

    Community Answer

    You can modernistic games with a Homebrew App called Riivolution. You cannot cheat in online games, as Nintendo shut down their WiFi services for Wii.

Show more than answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Ad

  • Consider using an external hard drive for amend storage capacity.

  • Wii games tend to take upward around 2 gigabytes per championship, and so plan appropriately when buying a flash bulldoze.

  • When on the main page for USB Loader GX, y'all can press the i button to update the cover art for each game on the wink drive.

Advertisement

  • Do non shut downwardly the Wii while installing annihilation mentioned in this article.

  • Pirating games is both against Nintendo's terms of use and against the law in full general.

Ad

Nearly This Article

Article Summary X

1. Install the Homebrew aqueduct on your Wii.
2. Create a Wii flash drive.
3. Download the installation files to your SD card and plug it into your Wii.
4. Get-go Homebrew.
v. Follow the prompts to install IOS263, cIOSX Rev20b, and USB Loader GX.
6. Chutdown your Wii, insert your drive, and turn the Wii back on.
seven. Select USB Loader GX.
8. Insert a game to burn it onto your USB bulldoze.
For more than help, including how to format your SD card for installation files, read on!

Did this summary assist you?

Cheers to all authors for creating a folio that has been read 850,296 times.

Did this commodity help y'all?

DOWNLOAD HERE

Posted by: vinsonbecampar.blogspot.com